Depending on the requirements, you can choose the following adhesive:
1.KD-866: fast bonding silicone material, without surface treatment, one component, easy to operate
2. KD-855: suitable for small areas of silica gel and metal surface, elevation, and so on bonding, silica surface KD-770 treatment
3.KD-833: suitable for silica gel, adhesive, PP, PE and other difficult to stick plastic, fast adhesive; silica surface with KD-770 treatment
4.G-988A: apply silicone adhesive silicone, silicone adhesive glass, silicone adhesive cloth, one component room temperature vulcanized rubber, after curing is elastomer has excellent waterproof, shockproof adhesive, high temperature, thickness of 1-2mm, about 10 minutes of the beginning of solid 5-6 hour curing, has a certain strength. Fully cured, it takes at least 24 hours. One component, without mixing, extrusion after smearing can be static, without heating
5.G-988: apply to silica gel, plastic (PC, PS, ABS, etc.), silica gel, metal (iron, aluminum, stainless steel, zinc alloy, etc.), silica gel, bamboo wood, silica gel, stone and so on. One component room temperature vulcanized rubber, after curing is elastomer has excellent waterproof, shockproof adhesive, high temperature, thickness of 1-2mm, about 10 minutes of the beginning of solid 5-6 hour curing, has a certain strength. Fully cured, it takes at least 24 hours. One component, without mixing, extrusion after smearing can be static, without heating