High Adsorbing Rate Activated Alumina Ball Oxide for Removal Fluorine
High adsorbing rate activated alumina ball oxide for removal fluorine with steel drum packing
Product Description.
CHEMXIN activated alumina, there are many micro-paths, so the specific surface is large.
It can be used as absorbent, desiccant and catalyst carrier. It is also a kind of trace water desiccant
and the pole-molecular absorbent, according to the absorbed molecule polarization, the attachment
force is strong for water, oxide, acetic acid, alkali ect. Activated alumina defluorinate just as the anion exchange resin, but the selectivity is much strong. The defluorinate effect of the activated alumina is good. The capacity is stable. It has high strength, low abrasion, no soften in water, no expansion, no powdery no crack. It can widely used in the deep drying of cracked gas, ethylene and propylene, hydrogen-generation, air separation, instrument air drying and fluorine treatment for H2O2, also in the absorbing pollution material, such as H2S, SO2, HF and paraffin in the waste gas, especially in the drinking water defluorinate.
1. Specification.
|
Model |
Activated Alumina |
|
|
Appearance |
White, Sphere, No Odor, Insoluble In Water, Innocuous |
|
|
Type |
KA402 |
|
|
Crystal Type |
Gamma |
|
|
Chemical Composition |
Al2O3 % |
≥93 |
|
Na2O % |
≤0.3 |
|
|
LOI |
% |
≤8 |
|
Bulk Density |
g/ml |
0.70-0.75 |
|
Surface Area |
m2/g |
≥300 |
|
Pore Volume |
ml/g |
0.30-0.42 |
|
Static Absorption (RH=60%) |
% |
Fluorine Absorption |
|
0.2-0.3 |
||
|
Attrition Loss |
% |
≤1.0 |
|
Crushing Strength (N/Piece) |
1-2mm |
≥40 |
|
2-3mm |
≥70 |
|
|
3-5mm |
≥150 |
|
|
Typical Application |
KA402: is for defluorinating |
|
|
Warranty: |
a)By National Standard HG/T 3927-2007 b) Offer lifetime consultation on problems occurred |
|
Hot Tags: High Adsorbing Rate Activated Alumina Ball Oxide for Removal Fluorine, manufacturers, brands, low price, in stock
Send Inquiry
