5A Molecular Sieve To Remove Water CO2 and H2S from Natural Gas Streams

5A molecular sieve to remove water CO2 and H2S from natural gas streams

Product Description.

Chemxin Molecular Sieve type 5A is an alkali alumino silicate; it is the calcium form of the Type A crystal structure. Type 5A has an effective pore opening of 5 angstroms (0.5 nm). It will adsorb molecules with a kinetic diameter of less than 5 Angstrom and exclude those larger.

The Benefits of Using 5A Molecular Sieve for CO2 Removal
Some of the prime benefits of using molecular sieves for steam cracking have already been gone through in terms of their selectivity and cost-effectiveness due to regeneration. They are also found to be energy efficient as compared to other techniques for CO2 removal. While some techniques require more energy expended for the capture of CO2 and the regeneration of the molecular sieves, the absorption and desorption processes run on comparatively lower energy consumption. This helps in the reduction of operational costs.

Apart from the cost and effectiveness, 5A molecular sieves are a scalable adsorption technology that finds applications in various gas flow volumes and rates. Also, they are industry versatile, for instance, they are used in flue gas treatment as well as natural gas purification apart from the petrochemical industry. On an environmental level since there are no chemicals used in this process of CO2 removal it does not affect the environment or human health. The regeneration process too does not require additional chemicals or reagents. As far as stability is concerned, it exhibits good stability in the long term and durability as well. This reduces replacement and maintenance-related costs. All these factors make the use of 5A molecular sieves for CO2 removal ideal for the long run while at the same time providing quality output at a cost-effective rate.

Typical Application:

1. Natural gas dewatering, CO2, CO, H2S;

2. Industrial air, nitrogen, inert gas drying and purification, hydrogen drying and purification;

3. The separation of heterogeneous hydrocarbons, enrichment oxygen, etc;

4. Can be widely used in industrial oxygen absorbing water, carbon dioxide and some organic gases

Regeneration:

Chemxin molecular sieve Type 5A can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes. To remove moisture from a 5A molecular sieve, a temperature of 250-300°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C, or mercaptans or CO₂ levels below 2 ppm.The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.

Size: 
5A - Zeolite are available in beads of 1-2 mm(10x18 mesh), 2-3 mm(8x12 mesh), 2.5-5 mm(4x8 mesh) and as powder, and in pellet 1.6mm, 3.2mm.

Attention:
To avoid damp and pre-adsorption of organic before running, or must to be reactivated. 

FAQ.

1).Offer samples?

---Yes. 

2). How long does it take to delivery?  

---In 7-10 days after receipt of 30% deposit.

3). What's your payment term?

---TT, Paypal, Western Union, L/C etc

Product Series.

Contact way.

E-mail: sales@chemxin.com

The quality of our products not only meets international quality standards, and can also meet many special quality requirement of the buyer.

Give us a negotiate chance will yield you a surprise.

Hot Tags: 5A molecular sieve to remove water CO2 and H2S from natural gas streams, manufacturers, brands, low price, in stock, 5a zeolite for pharmaceutical