
Zeolite 3A Adsorbent For Liquid Alcohol Dehydration
Chemxin Zeolite 3A adsorbent is Calcium sodium aluminosilicate, It could absorb the molecular which diameter is not more than 3 angstroms.
According to the industrial application specialties, our products have the characters of higher adsorption speed, stronger crushing and anti-contaminative resistance, more cyclic times and longer work-span. All these advantages have made it come to be the most essential and necessary desiccant in the fields of the deep drying, refinery polymerization for cracked gasses, ethylene, propylene and any other non-acidic gasses of liquids in petroleum and chemical industrials.
Specification
|
Model |
3A |
|||
|
Color |
Light gray |
|||
|
Nominal pore diameter |
3 angstroms |
|||
|
Shape |
Sphere |
Pellet | ||
|
Diameter (mm) |
1.7-2.5 (8*12 mesh) |
3.0-5.0 (4*8 mesh) |
1.6 (1/16 inch) |
3.2 (1/8 inch) |
|
Size ratio up to grade (%) |
≥98 |
≥98 |
≥96 |
≥96 |
|
Bulk density (g/ml) |
≥0.70 |
≥0.70 |
≥0.68 |
≥0.68 |
|
Wear ratio (%) |
≤0.20 |
≤0.20 |
≤0.40 |
≤0.40 |
|
Crushing strength (N) |
≥35/piece |
≥85/piece |
≥30/piece |
≥50/piece |
|
Static H2O adsorption (%) |
≥21 |
≥21 |
≥21 |
≥21 |
|
Dynamic capacity (%) |
≥20 |
≥20 |
≥20 |
≥20 |
|
Ethylene adsorption (‰) |
≤3.0 |
≤3.0 |
≤3.0 |
≤3.0 |
|
Water content (%) |
≤1.5 |
≤1.5 |
≤1.5 |
≤1.5 |
Customer Cases
In April 2024, we received a product demand from a domestic customer, which was to fill the molecular sieve adsorbent for the newly built ethanol drying project.
Ethanol is a colorless, transparent and volatile liquid. It is mainly used in the production of fine chemicals, synthetic materials, alcoholic beverages, fuel additives and other chemical, pharmaceutical and food fields.
Commercial ethanol generally has a high water content. Water will affect the chemical reaction performance of ethanol and reduce product quality. In addition, water will promote the protonation of ethanol to form ether and aldehyde impurities. Therefore, ethanol generally needs to be dried during storage and use.
Molecular sieve
In the industrial production of ethanol, the use of Chemxin molecular sieve is the most cost-effective drying solution.
1. Chemxin molecular sieve is selective adsorption, which can adsorb water in ethanol without adsorbing ethanol.
2. The molecular sieve has high adsorption accuracy, and the adsorption equilibrium can reduce the water content to 1PPM.
3. Physical adsorption throughout the process will not introduce impurities into the raw materials, and the process is simple.
4. Molecular sieves can be reused. After adsorption saturation, they can be used again after full regeneration.
Installation
According to the proposal proposed by the customer, after we fully communicated and calculated the cost-effectiveness, the project required a 3A molecular sieve loading of about 25 tons. At the same time, the customer raised his doubts to us. In order to ensure that there are no problems in the installation process, he hoped that our company could provide installation assistance.
In fact, we are also worried that customers will have problems with product use due to non-standard installation. So the two parties hit it off, and we immediately agreed that during the installation period, we would arrange our engineers to go to the site to guide the installation. Ensure the smooth progress of each link. Finally, the project was successfully completed.
Hot Tags: zeolite 3a adsorbent for liquid alcohol dehydration, manufacturers, brands, low price, in stock, 3a zeolite for petrochemical, desiccant 3a zeolite for methanol drying, 3a molecular sieve for ethylene
Send Inquiry
