Name: KA402 Activated Alumina For Defluorinating Manufacturers - Low Price - Chemxin
Brand: Chemxin
SKU: 53911419

KA402 Activated Alumina For Defluorinating

CHEMXIN Activated Alumina defluorinate just as the anion exchange resin, but the selectivity is much strong. The defluorinate effect of the activated alumina is good. The capacity is stable. It has high strength, low abrasion, no soften in water, no expansion, no powdery no crack. It can widely used in the deep drying of cracked gas, ethylene and propylene, hydrogen-generation, air separation, instrument air drying and fluorine treatment for H2O2, also in the absorbing pollution material, such as H2S, SO2, HF and paraffin in the waste gas, especially in the drinking water defluorinate.

Send Inquiry

Activated Alumina for defluorinating

activated alumina defluorination-3

Product Description.

Under certain operating and regeneration conditions, the drying depth of activated alumina balls can reach below -70 degrees dew point. It can also be used as a defluorinator for high-fluoride drinking water, removal of HF gas in the fluorine chemical industry (large defluorination capacity), defluorinator for cyclic alkanes in alkylbenzene production, and defluorination of drinking water: activated alumina defluorination is similar to anion exchange resin, but its selectivity for fluoride ions is greater than that of anion resin. The product has good adsorption defluorination effect and stable capacity. Each cubic meter of activated alumina absorbs 6400 grams of fluoride.

1. Specification.

Model		Activated Alumina
Appearance		White, Sphere, No Odor, Insoluble In Water, Innocuous
Type		KA402
Crystal Type		Gamma
Chemical Composition	Al2O3 %	≥93
Chemical Composition	Na2O %	≤0.3
LOI	%	≤8
Bulk Density	g/ml	0.70-0.75
Surface Area	m2/g	≥300
Pore Volume	ml/g	0.30-0.42
Attrition Loss	%	≤1.0
Crushing Strength (N/Piece)	1-2mm	≥40
	2-3mm	≥70
	3-5mm	≥150

Hot Tags: ka402 activated alumina for defluorinating, manufacturers, brands, low price, in stock